You can create a network path report for any component, cabinet or location using the reports option from the context menu.
In the report settings, you can choose the printer, paper size and orientation.
You can select how the legends are displayed.
You can choose between displaying all ports or connected ports only.
Finally you can check the two boxes to display the component images and print of separate pages respectively.
Click on OK to generate your network path report.
| Mockup |
|---|
| initialResourceID | 2278E287-509B-183B-1098-2EC38DDDB7D8 |
|---|
| platformArchiveID | att2719678465 |
|---|
| Alignment | Center |
|---|
| downloadLink | /download/attachments/28049432/balsamiq_2278E287-509B-183B-1098-2EC38DDDB7D8_Master.png |
|---|
| jwt | eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJzdWIiOiI1ZjlmZTg3NmFlYTQ2ODAwNmE4OTIxMzciLCJxc2giOiJjMjk1MzFjMDgzZGFmMDU0ZWQ3NzhjZTYxOGM4Y2EzODlkNTc1MTUxN2ZkYTk4Nzg5ZGExMTA2OTk1ZDdiYTllIiwiaXNzIjoiQ29uZmx1ZW5jZTozMzMzODM2MTM2IiwiY29udGV4dCI6e30sImV4cCI6MTYxNDg1MzMzNCwiaWF0IjoxNjE0ODUzMTU0fQ.lL1vpMw6xa9t7DlomeW5DdgyMeH2uWAZBKfk7wwwT9weyJzdWIiOiI1ZjlmZTg3NmFlYTQ2ODAwNmE4OTIxMzciLCJxc2giOiI0YjY0NWNhNmY1M2Y3MWFjM2I4Yzc5NDFiNDAxYzEwNWQ5NjgwMjk0ODc5OTdhODM1OTRhOTc0Mjk3ODg4ZmE0IiwiaXNzIjoiQ29uZmx1ZW5jZTozMzMzODM2MTM2IiwiY29udGV4dCI6e30sImV4cCI6MTYxNjAwNTQyOSwiaWF0IjoxNjE2MDA1MjQ5fQ.wWDsL0ynOBqryxK__X5oIVckf_X-Jwu4_NXcHsvVlEA |
|---|
| resourceName | |
|---|
| initialBranchID | Master |
|---|
|
In your network report you can find the component information here (1).
You can find the component location here (2).
The front and back side of the component is shown here (3).
The port connection information is displayed here (4). Here you will find the port information and the network paths.
